Hall Effect Current sensors
Product Description
| Item | Types | Technical Specifications |
| Hall Effect Current sensors from Telcon Ltd,UK | HTP-25 | HTP25 |
| HTP-50 | HTP50 | |
| HTP-100S | HTP100S | |
| HT-200M | HT200M | |
| HT-300M | HT300M | |
| Description of hall effects current sensors | ||
| Hall Effect current sensors are widely used in a variety of applications requiring an accurate, fast response signal proportional to the primary current being measured.
Products are available in a range of configurations covering primary currents up to 3000A, providing complete galvanic isolation between the primary current and the output. |
||
| Applications of hall effects of current sensors | ||
| ♦ UPS systems | ♦Industrial robots | |
| ♦ NC tooling machines | ♦ Elevator controllers | |
| ♦ Process control devices | ♦ AC and DC servo systems | |
| ♦ Motor Speed Controllers | ♦ Electrical vehicle controllers | |
| ♦ Inverters-controlled welding machines | ♦ General and special purpose inverters | |
| ♦ Power supply for laser processing machines | ♦ Controller for traction equipment e.g. electric trains | |
| ♦ Other automatic control systems | ||
Toroidal Cores
| Telcon high permeability strip wound toroidal cores are manufactured to the highest international standards, in a range ofalloys and size developed to meet the most stringent specifications, and are used in a variety of applications.
Core manufaturing, including winding and heat treatment, is carried out and controlled using processes and machines specially developed by telcon. Telcon cores conform to the appropriate standard specifications and every core supplied is individually tested and guaranteed. Certificates of Conformity are available , upon request, for alldespatches. |
|
| Alloy available for cores | |
| Mumetal@ R type | Mumetal , Mumetal+ |
| Supermumetal type | Super Mumetal, super Mumetal 150,Supper Mumetal 200 |
| Radiometal type | Radiometal 4500, Super Radiometal |
| Square Loop type | HCR |
| Strip Tichness | |
| Cores are would with the appropriate strip thickness from 0.013mm to 0.10mm to obtain optimum perfornace (0.20mm may be available in certain materials only.) For 50Hz 400Hz use,0.10mm is typical and for higher frequency applications 0.05mm, 0.025mm and 0.013mm are used as required | |
For more information on our range of cores click here - Toroidal Cores
GET IN TOUCH
Want to know more about the product, kindly fill the form below and our team will get back to you shortly.